Hey friends! I couldn’t resist this image from the recent release from Colorado Craft Company. Here I’m featuring the new Anita Jeram Paint the Town stamp set colored with Copic markers (see marker list below). 

As always, I’ve linked supplies with compensated affiliate links used where possible at no cost to you.

Featured products:

• * Anita Jeram Paint the Town by Colorado Craft Company [ SBC | CCC | SSS ]
• Copic coloring (see marker list below).
• Additional supplies listed below.

To start, I created an A2 top folding card base from Neenah Classic Crest cardstock and cut an A2 piece of design paper. I glued the background panel to the cardbase and set them aside.

I stamped the image from the Anita Jeram Paint the Town by Colorado Craft Company on a piece of Hammermill Smooth Cardstock. After coloring the image with Copic markers (see list below), I trimmed the panel to 2.75″ x 4.25″.

Next, I cut a piece of Black Licorice Cardstock by My Favorite Things to 3.75″ x 4.25″ and stamped the sentiment along the bottom with Hero Arts Pigment Ink in Unicorn. I sprinkled Nuvo Embossing Powder in Glacier White and heat set the powder.

Finally, I applied craft foam to the back of the image layer and assembled all the layers as shown.

That’s all for me today! Thanks for stopping by!

Supplies for Anita Jeram Paint the Town

COPICS: E51, E53, E55 (guinea pigs); BV20, BV23, R35, R37, R39 (paint brushes & jar) YG03, YG17 (grass)

[Compensated affiliate links used when possible. In addition, as an Amazon Associate I earn from qualifying purchases. Items marked with an asterisk (*) were provided by a store or the manufacturer. All other items were personally purchased.]

HEY FRIENDS! I’ve gotten a bit backlogged publishing cards from the Anita Jeram June 2022 release by Colorado Craft Company so I’m going to do one grand review of my FOUR remaining projects. I previously posted two cards using the Stargazers stamp set, one featuring the bears and the other featuring the bunnies as well as a card using the Well Loved stamp set. So here is everything else!

This is going to be a super long post so I thank you in advance if you make it to the end! If you want to just cut to the chase and shop the full release, I’ve listed all of the new stamps and coordinating dies in a separate list below. As always, I’ve linked the supplies with compensated affiliate links used where possible at no cost to you.

So let’s get started!

CARD 1: Anita Jeram Garden Party

Products featured:

• * Anita Jeram Garden Party by Colorado Craft Company [ SBC | CCC | SSS ]
• Copic coloring (see marker list below)
• Additional supplies linked in thumbnails below

I stamped the images from the Anita Jeram Garden Party stamp set using Nuvo Hybrid Ink in Black Shadow on a piece on Hammermill 100# smooth card stock cut to 4.25 x 5.5 inches. The image was colored with Copic markers as follows:

• Cat combo 1: W1, W3, W5
• Cat combo 2: C1, C3, C5
• Cat combo 3: E00, E04
• Grass & foliage: YG03, YG17, YG67
• Blanket, furniture, bow ties & drinks: RV55, RV63, RV66, B00, B04

After coloring the image, I trimmed 1/8″ off each side of the panel. I trimmed a piece of Simon Says Stamp 100# cardstock in Fog to 4.25 x 5.5 inches and adhered it to a cardbase cut from Neenah Classic Crest 100# cardstock. The sentiment from the Anita Jeram Garden Party stamp set was stamped on a piece of scrap white cardstock using Versafine Clair in Nocturne.

CARD 2: Anita Jeram Mice Bride

Products featured:

• * Anita Jeram Mice Bride by Colorado Craft Company [ SBC | CCC | SSS ]
• Folk Edge Rectangle Dies by Pinkfresh Studio [ SBC | SBP | SSS ]
• Salvaged Brick Stencil by Honey Bee Stamps
• Sunrise Radiating Rays Stencil by My Favorite Things
• Clouds Stencil by My Favorite Things
• Copic coloring (see marker list below)
• Additional supplies linked in thumbnails below

I stamped the images from the Anita Jeram Mice Bride stamp set using Nuvo Hybrid Ink in Black Shadow on a piece on Hammermill 100# smooth card stock cut to 4.25 x 5.5 inches. The image was colored with Copic markers as follows:

• Mice: W0, W1, W3, R30
• Bouquet: B63
• Foliage: YG01, YG03, YG17, YG67
• Flowers: RV55
• Bricks: E04
• Ledge: C0, C1, C2, C4
• Sidewalk: BV31, BV34

I did some freehand drawing to create the background of this image so you’ll have to use the photo for reference. The brick on the wall was created using the Salvaged Brick Stencil by Honey Bee Stamps. I positioned it in place and colored in the bricks using the E04 Copic marker.

For the sky I used two stencils: Sunrise Radiating Rays Stencil and the Clouds Stencil by My Favorite Things. For the sun, I used Distress Ink in Squeezed Lemonade and Scattered Straw. For the sky, I used Distress Ink in Speckled Egg.

After the ink was dry, I prepared the area of the sentiment using the Cottontail Embossing Powder Tool by The Rabbit Hole Designs. I stamped the sentiment from the Anita Jeram Mice Bride stamp set with Versafine Clair in Nocturne, covered it with Clear Embossing Powder by Simon Says Stamp, and heat set it.

I trimmed a piece of Hammermill 100# smooth card stock using the largest die in the Folk Edge Rectangles die set by Pinkfresh Studio and adhered it to adhered it to a cardbase cut from Neenah Classic Crest 100# cardstock. I trimmed the image panel so that it would fit in the center of the die cut piece and glued it in place.

CARD 3: Anita Jeram Time of My Life

Products featured:

• * Anita Jeram Time of My Life by Colorado Craft Company [ SBC | CCC | SSS ]
• Zig Clean Color Brush Markers by Kuretaki [ BAM | SSS ]
• Additional supplies linked in thumbnails below

I stamped the image from the Anita Jeram Time of My Life stamp set on a piece of Strathmore Series 400 Watercolor paper using Versafine Clair in Nocturne and colored the image using the following Zig Clean Color Brush Markers by Kuretaki:

• Left cat: 010, 091
• Scarf: 022
• Right cat: 091, 070
• Grass: 041

I stamped the sentiments from the Anita Jeram Time of My Life stamp set with Versafine Clair in Nocturne, covered them with Clear Embossing Powder by Simon Says Stamp, and heat set them.

I trimmed 1/8″ off each side of the image panel. I cut a piece of Simon Says Stamp 100# cardstock in Fog to 4.25 x 5.5 inches and adhered it to a cardbase cut from Neenah Classic Crest 100# cardstock and assembled the rest of the card.

CARD 4: Anita Jeram Paint the Town

Products featured:

• * Anita Jeram Paint Town by Colorado Craft Company [ SBC | CCC | SSS ]
• Zig Clean Color Brush Markers by Kuretake [ BAM | SSS ]
• A2 Matting Basics A Die Set by Spellbinders
• A2 Matting Basics B Die Set by Spellbinders
• Additional supplies linked in thumbnails below

I stamped the image from the Anita Jeram Paint Town stamp set on a piece of Strathmore Series 400 Watercolor paper using Versafine Clair in Nocturne and colored the image using the following Zig Clean Color Brush Markers by Kuretaki:

• Guinea pig: 050, 060, 070
• Paint brush: 010, 030,50, 070
• Jar: 025, 030, 031, 041
• Rainbow: 025, 031, 041, 050, 070
• Grass: 021

I trimmed the image panel and a piece of Black Licorice Prestige Card Stock by My Favorite Things using appropriately sized dies from the A2 Matting Basics A and A2 Matting Basics B die sets by Spellbinders. I trimmed a piece of Simon Says Stamp 100# cardstock in Fog to 4.25 x 5.5 inches and adhered it to a cardbase cut from Neenah Classic Crest 100# cardstock and finished assembling the card.

OK – that’s everything! Until next time ….

Supplies

[Compensated affiliate links used when possible. In addition, as an Amazon Associate I earn from qualifying purchases. Items marked with an asterisk (*) were provided by a store or the manufacturer. All other items were personally purchased.]